Guitars n' Stuff

Gibson Burstbucker Type 3 Pickup / Nickel -  OUT OF STOCK

compressed sound. Pair with the ’59 neck model for an evenly balanced output and tone.In addition to the alnico 5 magnet and wax potting, we hand build the ’59 Model with a variety of traditional vintage treatments, such as 42AWG plain enamel mag wire, long legged nickel silver bottom plate, vintage single conductor braided push back lead wire, and no logo. As with all of our P.A.F. style pickups, the ’59 Model is wound on Seymours old Leesona winder from the early Gibson factory in Kalamazoo, MI.

Seymour Duncan Pearly Gates SH-PG1 /Bridge    OUT OF STOCK

Imagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates.

Description:
The Pearly Gates bridge captures all the mojo of the original bridge pickup from Billy Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The Alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. Pinch harmonics really sing with this pickup too. It really has a

The Alnico 2 magnet and moderate windings yield a warm, sweet tone with more natural string vibration for great sustain. Classic rock players who get their distortion from the amp rather than the pickup love the APH-1. It allows them to back off the crunch and get beautiful clean tones with softer attack. Compared to the '59, the Alnico II Pro has a rounder sound with a spongier bass response

Description:
Seymour Duncan's APH-1 Alnico II Pro has found its way into the axes of guitarists such as Slash (Guns 'N Roses and Velvet Revolver) to Queensryche's Michael Wilton. Perfect for any genre from jazz to blues to classic rock and

Seymour Duncan Whole Lotta Humbucker - Bridge/ SH-18b   OUT OF STOCK

Seymours early 70s London special P.A.F. rewind recipe that gives you a fatter P.A.F. bridge tone, with more midrange harmonics.

Description:
Before Seymour built his own business, he was working for Fender Soundhouse in London. This was when The Yardbirds were kings and Seymour befriended some of his favorite musicians, and rewound pickups for them. One of these custom rewind recipes went to a very special player, and as a result of Seymour’s meticulous record keeping, this pickup lives on today.This pickup begins with a rough cast alnico 5 magnet, plain enamel wire, and Seymour’s unique winding pattern. The bridge is a vintage-hot 8.78k DC resistance. The rough cast magnets add warmth and balance so everything sounds bigger. What is sonically unique about

 Seymour Duncan TB4 JB Model Trembucker    OUT OF STOCK

Recommended for bridge position. Great for everything from heavy blues to heavy metal. World’s most popular humbucker! For balanced and warm instruments; Works especially well with rosewood fingerboards.

 Description:
The Seymour Duncan JB Model is the world’s most popular humbucker. This Trembucker version provides the same slammin’ output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock ‘n’ roll. Compared to the SH-14 Custom 5, the JB has a stronger treble detail. Some players use it with 250K pots to smooth out the highs. Comes with four-conductor

Seymour Duncan SL59-1b Little 59 for Strat  /Bridge, White     OUT OF STOCK

Single coil sized humbucker, with the growl and warmth of a PAF that will transform the bridge position of your Stratocaster into a 59 Les Paul.

Description:
The Little 59 bridge model is a single coil sized humbucker that will inject the sound of a Les Paul directly into your Stratocaster. Its medium output and scooped mids will really add depth to your bridge position. The

On the shop floor of the original Gibson plant in Kalamazoo, Michigan, the earliest Gibson “Patent Applied For” humbuckers were wound using imprecise machines, resulting in pickups with varying degrees of output and tone. The BurstBucker™ line of pickups represents Gibson’s drive to recapture the magic of the original “Patent Applied For” humbuckers. First introduced in the early 1990s, the Gibson BurstBucker™ — Types 1, 2, and 3 — successfully captured the subtle variations of true, classic humbucker tone with historically “unmatched” bobbin windings and Alnico II magnets. They produce an airy, full tone, and when overdriven they achieve a magical distortion with the slightly enhanced highs that made the originals famous. BurstBucker™ Type 1 features a lower output, excellent for the neck position. BurstBucker™ Type 2 features medium output, and is perfect for both positions. BurstBucker™ Type 3 is overwound and hot, which is typically ideal for the bridge position. None of the BurstBuckers™ are wax potted, and all feature vintage braided two-conductor wiring.

High output humbucker for use in bright guitars. Great for pop, country, blues, classic rock and heavy rock.

Description:
The Custom CustomTM is our SH-5 Duncan CustomTM humbucker with an Alnico II magnet for warm and smooth highs, more midrange, and a spongier bottom end than the SH-5. It's a good choice for players who need a traditional vintage tone with increased output. Comes with four-conductor hookup cable.
Recommended for bridge position. Often a Custom Custom is paired with a Pearly Gates for bluesy P.A.F. tones in the neck. For brighter toned instruments. Works especially well with maple and ebony fingerboards.

Seymour Duncan SH-1b '59 Model 1-Conductor Pickup /Zebra    OUT OF STOCK

The 59 Model bridge pickup is a full sounding, versatile P.A.F. style humbucker with an articulate treble attack, full bottom end, and scooped midrange.

Description:
The ’59 bridge model is great for all types of rock and blues. We designed these vintage style coils to give it an airy quality that keep this pickup planted firmly in the P.A.F. family. The alnico 5 bar magnet, and vacuum wax potting have been added to compensate for lighter guitar strings and louder amplifiers than were ever used in the ’50s. The result is a pickup with tons of old-school tonal character, but with a brighter top end, and a more

4-conductor lead wire gives you access to parallel and split wiring options for added versatility. This pickup is a drop-in for any single coil pickup route.Pair with our Little ’59 Strat neck or Duckbuckers Strat – neckHand built in Santa Barbara, CA, the Little 59 for Strat comes with a ceramic magnet, 4-conductor lead wire for multiple wiring options, and is wax potted for squeal free operation.

Seymour Duncan APH-1n Alnico II Pro Humbucker /Neck    OUT OF STOCK

620 W. High Street Ebensburg, Pa 15931

814 - 472 - 4900

hookup cable. Application The archetype hot-rodded humbucker for over 30 years. Great for everything from heavy blues to heavy metal. Complete Setup Recommended for bridge position. Often a JB is paired with a neck pickup like the SH-2n Jazz (Seymour’s favorite) for versatility or a SH-1 ‘59 for P.A.F. tones. Guitars For balanced and warm instruments. Works especially well with rosewood fingerboards. Players: Paul Stanley - KISS Gary Rossington - Lynyrd Skynyrd Ty Tabor - King’s X Steve Marker - Garbage Nick Hexum & Tim Mahoney - 311 John Connolly - Sevendust Dave Mustaine - Megadeth

the Whole Lotta Humbucker pickups is the way that they push your amp and add a very slight natural compression and sustain to your sound. Perfect for raw overdriven rock sounds. Pair with the Whole Lotta Humbucker neck model for a great sounding matched set.Hand built in Santa Barbara, CA, the Whole Lotta Humbuckers use a rough cast alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and are wax potted for squeal free operation.

special bottom coil that actually injects negative hum into the pickup circuit, and, at the end of the production process, we fine tune each pickup for maximum noise cancelation. You get all the great qualities of a classic Strat pickup, and none of the hum. Pair with our Stack Plus middle RWRP and neck for a complete and quiet set.Hand built in Santa Barbara, CA, it uses hand ground alnico 5 rod magnets, and comes with a splittable 3-conductor lead wire to give you access to true single coil operation. Each is wax potted for squeal free performance.

anything in between, the APH-1 is characterized by a warm sound and moderate output. The APH-1 is equipped with four-conductor cable to facilitate a variety of pickup switching configurations. For tones that can be classic and modern at the same time, the APH-1 fits the bill! The APH-1 is often used in both neck and bridge positions, or in the neck with a higher output pickup like an SH-11 Custom Custom or SHPG-1b Pearly Gates for heavier rock or hotter blues sounds from the bridge position. The APH-1 works well with brighter toned instruments and responds well to maple and ebony fingerboards. It also works great with hollow- and semi-hollowbody guitars..

spacing, perfect for symmetrical positioning under the strings of guitars with a tremolo or wide spaced hard tail bridge (2 or wider from the center of the Low E to High E directly over the bridge pickup). Hand built in our Santa Barbara, CA factory, the Full Shred Trembucker uses an alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.

Seymour Duncan STK-S4b Classic Stack Plus Strat /Bridge, White   OUT OF STOCK


This noiseless bridge Stratocaster pickup is hand tuned for that warm bell like tone without any of the associated 60-cycle hum.

Description:
The Classic Stack Plus bridge pickup looks and sounds like a true Stratocaster single coil but none of the traditional Strat hum. It has all of the sparkle and chime that you would expect from a vintage Strat pickup. It has a

Gibson Burstbucker Type 1 Pickup / Nickel -  OUT OF STOCK

 Seymour Duncan TB-11 Custom Custom Trembucker Pickup - Bridge   OUT OF STOCK

Players:
Josh Homme / Queens of the Stone Age, Michael Wilton / Queensryche, Clint Lowery / Sevendust, Greg Hetson / Bad Religion

On the shop floor of the original Gibson plant in Kalamazoo, Michigan, the earliest Gibson “Patent Applied For” humbuckers were wound using imprecise machines, resulting in pickups with varying degrees of output and tone. The BurstBucker™ line of pickups represents Gibson’s drive to recapture the magic of the original “Patent Applied For” humbuckers. First introduced in the early 1990s, the Gibson BurstBucker™ — Types 1, 2, and 3 — successfully captured the subtle variations of true, classic humbucker tone with historically “unmatched” bobbin windings and Alnico II magnets. They produce an airy, full tone, and when overdriven they achieve a magical distortion with the slightly enhanced highs that made the originals famous. BurstBucker™ Type 1 features a lower output, excellent for the neck position. BurstBucker™ Type 2 features medium output, and is perfect for both positions. BurstBucker™ Type 3 is overwound and hot, which is typically ideal for the bridge position. None of the BurstBuckers™ are wax potted, and all feature vintage braided two-conductor wiring.

Seymour Duncan Full Shred Trembucker TB-10    $89.99

The Full Shred Trembucker is a bright, moderate output rocker with a tight low end, and scooped mids.

Description:
The Full Shred Trembucker (F-spaced) bridge delivers a clear, focused humbucker tone with a nicely balanced treble & bass response, and a backed off midrange. The shorter Allen head poles and alnico 5 bar magnet bring a nice crisp clarity to the high end, while keeping the low end tight and articulate. Great for all types of rock, blues, and metal, and works well in any humbucker equipped guitar with medium to warm tone.Pair with the Full Shred neck model for a well matched setup.Trembuckers have wider pole piece

sound. Pair with the ’59 neck or Jazz neck model for a nicely balanced setup. Hand built in Santa Barbara, CA, the 59/Custom Hybrid uses mismatched coils, an alnico 5 bar magnet, nickel silver short leg bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.

growl all its own and will help to bring any humbucker-style instrument to life, but it’s also great for adding some growl to a Stratocaster. Match with the Pearly Gates neck model for the full Texas experience.

Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan for that unmistakable vintage mojo.

Seymour Duncan SH-16 '59 Custom Hybrid Pickup /Nickel   OUT OF STOCK

Harmonically rich hybrid humbucker that uses one coil from the 59 Model bridge and one coil from the higher output Duncan Custom model.

Description:
The ’59/Custom Hybrid is a medium output, gritty sounding humbucker that sparkles with upper midrange harmonic content. The brainchild of our incredibly knowledgeable forum members, this humbucker is the result of experimental coil swapping in order to push into new tonal territory. The mismatched coils, and the alnico 5 bar magnet keep the low end nice and tight, and give the mids a grind that is perfect for hard rock and metal. Plenty of crunch and bite on top as well. When split, you get the Custom’s 7k coil for a more distinct single coil